Year Round Irrigation System Maintenance

Here is some helpful information to make maintaining your irrigation system easier and simpler, freeing you up for other items on your to-do list. Note that observation and winterization are key factors to perform.


Steady Observation Is Key For Starters


If you are planning on having an irrigation system installed at your commercial property or residence, it is worth considering having a master plumber handle the installation.  This will greatly reduce problems and save you time. If you are one of many that have already installed or had your irrigation/sprinkler system installed, then your job is going to be observing the efficiency of where the water is being dispersed and how much.  Ensuring each day that every nozzle and mechanism is moving and cycling correctly is important to know, so if a problem does develop you can catch it early.  Letting a problem go unfixed for a while could severely change the balance of color and life in your yard and landscaping, leaving areas not watered, brown and dead.  Mismanagement and inaccuracy of irrigation could also leave large amounts of water in places that you don’t want, causing other unwanted problems as well.  Be sure to inspect each day that the placement, pressure, accuracy, and movement are all in check and working the way they should be to maximize the output and success of your irrigation system.


Winterizing Your Irrigation


Next on the list of necessary steps especially for anyone who lives in a region that experiences freezing weather would be properly winterizing the hoses, sprayers, and water supplied to each area.  Always be sure that the water is shut off ahead of time so the weather doesn’t surprise you and leave you frozen lines or ruined mechanisms.  You will also need to get all the water out of the entire sprinkler system, including sprinkler heads, hoses, nozzles, and spigots.  Sometimes due to the complexity of the system, gravity alone is not enough.  If water is trapped or too far down in a line or area to reach then compressed air or a specially made blower for pools and plumbing will help you push the remaining water out.   When the weather rolls back around and things have thawed out thoroughly, cleaning and inspecting the whole sprinkler system before use is essential for maximum success when running.  Debris can create clogs and can increase the pressure leaving an area damaged and unable to perform.


When A Problem Arises


Lastly, on the list of actions to take for getting the most out of your irrigation system is knowing how to respond when you encounter an issue.  Even if you take extra special care of your sprinkler/irrigation system every day year after year, problems and accidents can still happen, unfortunately.  If you encounter a leak you will need to figure a way of closing up the leak ASAP so water is not wasted and an area is not getting soaked.   Running across a broken line or nozzle will most likely require disassembling the system and installing a new part to solve the issue.  The more you know and understand the specifics of your system, the more you’ll be prepared to resolve the issue in a number of different possible situations and circumstances.  If you experience something that you are unsure how to install, replace, or fix altogether, you may need to contact a professional that specializes in emergency plumbing services in DC for further assistance.


DC plumbing careers


Leave a Reply

Your email address will not be published. Required fields are marked *