Category Archives: Helpful Hints

Tips For Lowering Your Hot Water Bill During The Cold Season

September 23, 2018DC Plumber, Energy Efficiency, Helpful Hints, How To, Plumbing Advice, Save Money, Uncategorized, Water Heatersmatt

The hot water heater becomes super essential during the cold season. This is because we really need that hot water during these chilly months. And now that the warm spring and summer months are behind us, it’s time to think about that water heater. It’s quite normal to use hot water for bathing and cleaning during the warm seasons. But you can always opt for a cold shower on a hot summer day. The fall and winter seasons are quite chilly and hence you have no choice but to power up that water heater so that you can enjoy a hot bath or shower. This means that the hot water bill increases significantly during the cold fall and winter months. But there are several measures that you can implement to lower your hot water bill during the cold seasons. Use the following tips to reduce your hot water bill this fall and during the upcoming winter season.

Insulate The Tank

The most effective way of lowering your hot water bill is by insulating the tank in your hot water heater. Bearing in mind the fact that the hot water heater is one of the biggest consumers of energy at home, you should do everything you can to reduce its energy intake. If you won a conventional storage water heater, then you know that it has a reservoir or tank for holding the heated water. The bad news is that this tank is susceptible to standby heat loss. In other words, the heated water loses some of its heat when sitting in the tank. In order to minimize this energy loss, you should insulate your tank thoroughly. You can insulate the tank in your water heater without consulting a professional plumber. You just need to follow the instructions in the insulation materiel and everything will be fine.

Shorter Showers

You should consider reducing the number of showers that you take to reduce your water and energy bills. You should also start taking shorter showers top reduce the amount of water used and the energy consumed by your water heater. And while we are still talking about saving water, you should avoid those long baths. Go for shorter showers instead.

Set A Low Temperature

You can save the amount of energy consumed by your hot water heater during the warm and cold seasons by adjusting the temperature to a lower setting. The Department of Energy recommends that you set your water heater at 120 degrees. This temperature is adequate to heat the water sufficiently. It also prevents unnecessary energy consumption and prevents scalding when you shower.

Upgrade To A High Efficiency Model

If you own an old standard tank water heater, then you should consider upgrading to a new high efficiency model. The Environmental Protection Agency (EPA) gives Energy Star certification to high efficiency products like water heaters. These high efficiency models consume a fraction of the energy consumed by older highly inefficient models. You can consult a professional DC water heater plumber regarding an upgrade or replacement of your old water heater. He will offer you various options to choose from in order to achieve maximum energy savings.

Professional Qualities To Look For In A Water Heater Plumber

September 22, 2018DC Plumber, Helpful Hints, How To, Plumbing Advice, Uncategorized, Water Heatersmatt

We call professional plumbers when our plumbing fixtures and appliances are broken. You can also request for professional plumbing services when your water supply piping network or your drainage and sewer system is damaged. After you have placed the call, the professional plumber arrives in your home to diagnose ad fix the plumbing problem. The plumber uses his skills and experience to determine the site and cause of the plumbing problem. He then implements the mot viable solution to fix the problem. The hot water heater is one of the most critical plumbing installations. This device is used to furnish all your hot water needs at home or in the workplace. And like all other plumbing fixtures and appliances, the hot water heater breaks down with time. Your water heater can also malfunction due to various other problems like corrosion, leaking, or powering issues. You should not hesitate to call your local plumber when your water heater malfunctions. Professional plumbers who specialize in the installation, repair, replacement, upgrade, inspection, and maintenance of hot water heaters are referred to as water heater plumbers. Consider the following professional qualities when hiring a waster heater plumber.

Competence And Experience

You should always consider the academic and technical qualification of any plumber before hiring him. Basically, a plumber undergoes three training levels before acquiring a practicing license. The professional journey starts at the apprenticeship level. The apprentice plumber trains both in class and in the field before sitting for exams to become a journeyman plumber. The journeyman plumber undergoes additional training before sitting for exams to become a master plumber. The master plumber can now apply for a practicing license at the state level. You should ask any plumber about his training before hiring him. You should also ask him how long he has been in the plumbing industry to ascertain his level of experience. In order to hire the best water heater plumber in DC, look for professional plumbers who specialize in water heater problems.

Licensing

You should also ensure that your plumber has a valid license to practice in Washington DC. If your water heater is faulty and you need repairs, hire a DC licensed master plumber for the job. You can always verify the license number of any plumber with the state contractors” licensing body. You should also ensure that your water heater plumber is properly insured and bonded to avoid any legal problems during the contract.

Reliability

You should look for a reliable plumber to fix or replace your water heater. You can always tell whether a plumber is reliable or not by visiting online customer review platforms like Yelp, Google, and Angie’s List. Actually you can use these sites to determine the reputation of any plumber. You should only hire the highest rated and mot positively reviewed plumber for your water heater project.

Punctuality

When consulting any plumber regarding your water heater problem, you should ask him how long he will take to travel to your house. You should hire a punctual plumber to fix your water heater.

Fair Pricing

Never forget to ask about the cost of having your water heater repaired. Most established plumbers will offer you a free cost estimate for any plumbing problem or project. Make sure that your plumber charges you fairly for his water heater services.

Common Plumbing Mistakes That You Should Avoid

September 21, 2018DIY Plumbing, Helpful Hints, How To, Plumbing Advice, Uncategorizedmatt

Some plumbing problems can be avoided by being more careful and responsible when using your home plumbing system. You can avoid those costly plumbing service calls if you become more responsible when using your plumbing fixtures and appliances. Although you can’t avoid plumbing issues altogether, you can lower your plumbing repair bill significantly by avoiding careless plumbing mistakes. For instance, you can lower your water bill significantly if you adopt responsible water consumption habits. This means that you should avoid wasting water at home. And in order to achieve this, you should turn off all taps and showers when you are not using them. You should also consider recycling the water that you use for bathing and cleaning to water your garden. There are many other responsible plumbing habits that you can adopt to minimize plumbing issues at home. Let us look at some common plumbing mistakes that you should avoid.

Leaving The Water Running

We have already talked about this. Always turn off all taps and showers before leaving the house. You should also consider trapping the water you use for showering for recycling in your garden. And if your hot water heater takes some time to heat up, do not leave the shower running before it reaches the right temperature. Consider installing a thermostatic showed or trap the cold water in a bucket for other uses.

Flushing Solid Waste

Toilet clogs are a real menace. These are some of the most common plumbing problems in any house. The funny thing about toilet clogs is that we usually cause them. One thing that you need to know is that the toilet is only meant for disposing human waste and tissue paper. Avoid flushing solid waste in your toilet in order to prevent those nasty toilet clogs.

Dumping Grease In Your Sink

Sink drain clogs are another common plumbing issue. And just like toilet clogs, sink drain clogs are caused by careless waste disposal habits. You should avoid dumping fats, oils, and greases in your sink. These greases accumulate and coagulate inside your drainage pipes forming muck, which clogs the pipes.

Postponing Plumbing Repairs

All plumbing problems should be handled immediately. If you are having any type of fault or malfunction in your plumbing system, do not hesitate to call a professional plumber for a permanent fix. If you suspect or detect any type of leak, such as a gas leak in your house, request for DC gas line services immediately.

Hiring Incompetent Plumbers

You should always hire qualified and experienced plumbers for any plumbing problem or project. Vet any local plumber thoroughly to ensure that he is highly skilled and experienced to handle the plumbing problem at hand. You should also visit online customer review platforms liker Yelp and Google to check the reviews and rating posted by past clients. Also ensure that your plumber is properly licensed, insured, and bonded as required by the law.

Installing Low Quality Fixtures And Appliances

You should never skimp on plumbing fixtures and appliances. Install high quality plumbing fixtures and appliances to ensure their functionality and longevity. For electrical or gas powered appliances, choose high efficiency models to reduce operating costs. You should install WaterSense certified low-flow fixtures and Energy Star certified appliances to save water and power in the house.

Common Impurities That You Can Find In Your Tap Water

September 20, 2018DC Plumber, DIY Plumbing, Helpful Hints, How To, Plumbing Advice, Uncategorizedmatt

Tap water is not always clean. You can turn on your tap and get brown water full of dirt and debris. The water can also have other impurities that are not easy to see. Some of these impurities like minerals are detected by taste. You should always ensure that the water you drink is clean and safe. And although some of these imparities do not pose any health hazard, they can still ruin the taste of the water. You should test your water regularly to ensure that it does not contain any impurities. Let us now look at some common impurities that you can find in your tap water.

Dirt

Dirty tap water is not very common but you can still get it from time to time. Dirty water contains actual dirt, and maybe sand and silt. Dirty water is an indication that the main water supply line is damaged. If this is the case, then you need to hire a DC emergency plumber immediately to fix the problem. You should start by calling your local water supply company to find out whether the problem is on their side or yours. If the water supply company has no problem, then you need your local plumber to inspect your water supply pipes. Dirty water is more common in households with wells. If you get your water from a well, then the dirt could be coming from the well. If it’s a new well, try running the water for some time to drain out the system. You should also consider repairing or replacing the water screening and filtration system.

Minerals

Minerals are very common in water. This is what we refer to as hard water. Depending on your locality, you can discover that your water has high levels of iron, calcium, or manganese. And although these minerals do not pose a health hazard to people or animals, they can still ruin the taste of the water. These metals can also leave stains on your clothes and dishes when you use the hard water for cleaning. They also inhibit lathering making cleaning and bathing a huge hassle.

Rubber

With time, the rubber tubing in your plumbing appliances, such as the hot water heater, can start to wear out. The tiny pieces will be drowned in the water and you can find these pieces when you fetch the water for drinking or cleaning. Rubber is mostly worn out by chlorine. As such, if you use chlorine to treat your water, then you can expect rubber impurities in the long run. If you notice rubber bits in your water, call a professional plumber to replace the worn-out rubber tubing.

Carbon

You can also notice carbon specks in your tap water. This usually occurs when the carbon in your water filter disintegrates. Carbon is used to trap foreign bodies and impurities from the water. But with time the carbon filter and/or cartridge gets old and worn-out. This is when you start to notice tiny specks of carbon in the water. Check the user manual of your carbon filter to see how you can repair it or replace the cartridge.

Rust

Rust is one of the most common impurities in water. You will find rust particles in your water when some of your pipes, fixtures or appliances are corroded. You can also get the rust from your water supply company. If consumed in install amounts, rust is not a health hazard. But it still undermines the taste and equality of the water. You will need a professional plumber to determine the source of the rust and to fix it.

6 Reasons Why You Should Install Plastic Pipes In Your Plumbing System

September 19, 2018DC Plumber, DIY Plumbing, Helpful Hints, Plumbing Advice, Save Money, Uncategorizedmatt

Pipes are some of the most important parts of a plumbing system. We rely on water supply pipes for all our fresh water needs. Drainage and sewer pipes are responsible for the disposal of all liquid waste from the house. As such, you should only install high quality pipes in your plumbing system. Pipes are made from many different types of material. Some older pipes were made of clay and ceramic. As the plumbing industry evolved, lead pipes were introduced. These have been banned because they can cause lead poisoning. Steel pipes are some of the most popular metallic pipes in the market today. But they have one major problem; corrosion. Copper pipes are currently the most popular metallic pipes in the plumbing industry. But copper pipes are quite expensive. Plastic seems to be the best material for manufacturing plumbing pipes today. But not all types of plastic pipes are perfect. Cross-linked polyethylene or PEX tubing is the most recommendable type of plastic for plumbing. Here are six reasons why you should consider installing PEX pipes and upgrading your plumbing system.

No Corrosion

Plastic does not corrode or rust with time. Corrosion is one of the main reasons why steel pipes are not so popular in the plumbing industry. Corrosion eats away the steel pipe causing leaks and also undermining the quality of water carried in these steel pipes. One of the most amazing things about plastic is that it doesn’t corrode.

Flexibility

PEX pipes are very flexible and are hence very easy to install. You can install PEX pipes anywhere with minimal hassle. This means that plastic pipes are versatile when it comes to installation. Some plastic pipes like PVC do not carry hot water. But stronger materials like CPVC and PEX can handle hot water.

Cheaper Than Metallic Pipes

Plastic is far much cheaper than metal. Plastic pipes are hence several times cheaper than metallic pipes. Comparing the price of PEX plumbing pipes with copper plumbing pipes, PEX pipes are up to 30% cheaper. As you can see, plastic offers a cheaper alternative to metal. Installing PEX pipes in your plumbing system will save you a fortune when purchasing the materials.

Lower Risk Of Frozen Pipes

Plastic plumbing pipes are not as susceptible to freezing as metallic pipes. This is due to the fact that plastic does not retain as much cold as metal. You can easily test this theory by leaving a plastic spoon and a metallic one outdoors during the cold season. The metal spoon will be far colder than the plastic one. When it comes to the plumbing system, plastic pipes lower the risk of bursting during the cold season. This does not mean that your plastic pipes will not freeze if left un-insulated. It only means that the risk is greatly reduced.

Minimal Risk Of Leaks

Unlike other types of plastic and even metal, PEX plastic does not have a problem with pinhole leaks. The material is tough and strong and it doesn’t crack or puncture easily. This means that installing PEX pipes in your plumbing system will minimize the occurrence of leaks significantly.

Durable

As any professional plumber who specializes in DC drain services will tell you, plastic is very durable. As we have already stated, plastic does not corrode. PEX plastic is very strong and lasts for a very long time.

How To Prevent And Eliminate Mold In The House

September 18, 2018DC Plumber, Helpful Hints, How To, Plumbing Advice, Uncategorizedmatt

Mold is one of the most destructive agents in the house. Mold and mildew thrive in wet environments. They appear like black or floral spots on the walls and floors of your bathroom and near the kitchen sinks. Mold and mildew occur in damp dark areas. The disturbing thing about mold and mildew is that they can pose a very serious health hazard. Mold and mildew also damage any surface they grow on. They cause discoloration and cause an unappealing hue on your walls and floors. The good news is that you can prevent mold and mildew from growing in your house. As mentioned above, mold and mildew thrives in damp surfaces. You only have to ensure that all the walls and floors in your house are dry to prevent the growth of mold and mildew. But if you already have a mold and mildew problem in your house, then you can fix it by scrubbing the affected areas with a detergent. And if you have a really serious mold and mildew problem, then you can call a professional plumber for assistance. If there are some wet dark places in your bathroom where mold and mildew thrives, you can request DC bathroom remodeling services to have the whole bathroom renovated. Let us look at some effective ways of preventing mold and mildew growth and how you can get rid of these nasty fungi.

Mold Prevention

The most recommendable thing when it comes to mold and mildew is prevention. You should try to prevent mold and mildew growth as much as possible. The main problem with mold and mildew is that they tend to colonize any space. These fungi are also very stubborn and hence not very easy to get rid of. Let is now discuss the most effective way of preventing the growth of mold and mildew.

Maintain A Clean Dry Environment

You should ensure that all those surfaces in your bathroom a kitchen are always clean and dry. You should especially focus on those hidden corners and ledges where water splashes on when you are showering. You should mop up all the water splashed when you are showering or cleaning. All surfaces near the sinks and showers should be mopped dry to prevent mold and mildew growth. You should also consider opening windows or installing a ventilator fan in your bathroom to help dry the walls and floors much faster after a shower.

Fix All Leaks

The presence of mold or mildew in your house can indicate a leak. Mold and mildew will grow in a surface that is frequently wet. If your pipes are leaking or if you have faulty faucets or showers, then you can expect a mold and mildew problem in your house. Inspect your house regularly and thoroughly to ensure that there are no leaks.

Mold Removal

If you already have a mold and mildew problem in your house, then you should try to remove it immediately.

Scrub It Away

You can get rid of mold and mildew by scrubbing it away with a coarse cleaner and detergent. You can use a bleach mixture or spray cleaner to remove mold and mildew.

Hire A Professional

If the mold and mildew problem persists, call a professional plumber for assistance. The plumber will use all the necessary tools and equipment to remove all the mold and mildew from your house.

Care And Maintenance Tips For Your Home Sewer System

August 23, 2018DC Plumber, Helpful Hints, How To, Plumbing Advice, Sewer Issues, Uncategorizedmatt

The sewer system is one of the most critical sections of your home plumbing system. The home sewer system is responsible for disposing of all liquid waste in the house. The sewer system consists of a series of drainage and sewer pipes that carry liquid waste away from the house. The home sewer system is usually connected to a private septic tank or to the municipal sewer line via a main sewer line. In order to ensure that all the liquid waste produced in your home is properly disposed, you should always maintain an excellent sewer system. This means that you need to invest some of your time and some considerable resources to ensure that your home sewer system is always in tiptop condition. Today we have compiled some useful care and maintenance tips for your home sewer system. Read on to learn what you should do to ensure the functionality and enhance the health of your home sewer system.

Proper Waste Disposal

One of the most common problems in the home sewer system is clogging. Your drainage and underground sewer lines can clog from time to time. This can cause very serious sewer backups in your bathroom and kitchen. One of the most common causes of sewer line clogs is poor waste disposal habits. You can avoid sewer line clogs by ensuring that you dispose all your waste responsibly. Firstly, you should never dispose any solid waste down your drainage and sewer lines. You should also avoid disposing of fats, oils, and greases via your sinks as you wash your utensils. This fatty waste coagulates and forms a muck which clogs your sewer lines. All solid waste should go into your garbage can for collection.

Proper Flushing Habits

The toilet is one of the key components of your sewer system. Many sewer line clogs are caused by poor flushing habits. This is where you find people dumping all kinds of trash and waste in the toilet. You should never flush any solid waste or materials in the toilet. This includes all towels, hygiene products, feminine products, and so on. Make sure that you observe proper flushing habits to avoid clogging your home sewer system.

Regular Drain Cleaning

You should have your drainage and sewer lines cleaned from time to time. You can hire a professional plumber who provides DC sewer and drain cleaning services to clean your drains once or twice a year. This is a kind of maintenance service for your home sewer system.

Regular Camera Inspections

Many plumbing companies now offer underground sewer camera inspection services. In order to ensure that all your drainage and sewer lines are in good working condition, have them inspected regularly using underground video camera technology.

Timely Repairs

You should not hesitate to call your local plumber any time you notice or suspect a fault in your home sewer system. Whether you are suspecting a leak or a clog in your sewer lines, call a professional plumber as soon as possible to fix the problem before it becomes too serious.

Removal Of Tree Roots

Tree roots cause a lot of damage to underground sewer liners. These roots infiltrate the pipes and cause them to leak or clog. You should remove all big trees that are planted over your sewer lines to avoid underground root intrusion.

Professional Qualities To Look For In A Gas Plumber

August 22, 2018DC Plumber, Helpful Hints, How To, Plumbing Advice, Uncategorizedmatt

There are two main types of professionals in the plumbing industry. There is the general plumber who handles all kinds of plumbing issues that deal with water. And we also have the gas plumber who handles all gas-related plumbing issues. These two plumbing professionals undergo very different training programs. The amazing thing is that they all undergo three main levels of training in their respective industries. The general plumber starts as an apprentice in the plumbing industry. He then proceeds to the journeyman level before becoming a master plumber. Similarly, the gas plumber starts at the apprenticeship level in the gas industry. He then becomes a journeyman gas plumber before graduating into a DC master gas fitter. Some of the most highly qualified plumbers undergo both training programs to become both general and gas plumbers. Most plumbing companies maintain professional teams featuring both types of plumbing professionals. You can hire either a general plumber or a gas plumber depending on your plumbing needs. But if you are out there looking for a gas plumber, then you should always consider the following professional qualities.

Competence And Experience

Before you hire any type of plumber, you should consider his competence and expertise in the field. You should first inquire about his academic and technical credentials. Regardless of the nature of your plumbing project, you should settle for the most qualified plumber in your locality. This means that if you need a gas plumber, then you should hire a master gas fitter or at least a journeyman gas plumber. Another key consideration when hiring a gas plumber is experience. You should ask the plumber how long he has been in the plumbing business in order to ascertain his experience level. You should try to find out how much experience the gas plumber has with the kind of gas plumbing problem or project that you have.

Punctuality

Another important professional quality to look for in a gas plumber is punctuality. You should always look for a plumbing company that offers timely services. When it comes to gas-related issues, urgency is very important. For instance, if you detect a gas leak in your house, then you need instant gas leak detection and repair services to avoid a fire or explosion in the house. When you call up your local gas plumber with an emergency, you should ask him how long he will take to respond to your gas problem.

Legal Compliance

You should always ensure that your gas plumber is properly licensed in line with state and federal laws. Like general plumbers, gas plumbers are licensed at the state level after fulfilling various legal and regulatory demands. The gas plumber must have successfully completed all the necessary training levels in order to get a practicing license. He should also have proper insurance and bonding before he can work professionally. Make sure that your gas plumber has a valid license number and that he has proper insurance and bonding.

Professional Courtesy

Plumbers have to deal with all kinds of clients when doing their jobs. This is why they should have proper training in professional etiquette. Your gas plumber should be courteous, patient, and understanding. He should answer all your queries patiently and professionally.

Tips For Hiring A Bathroom Remodeler In Washington DC

August 21, 2018Bathroom Remodeling, DC Plumber, Helpful Hints, How To, Plumbing Advice, Uncategorized, Water Heatersmatt

Many established plumbing companies now offer bathroom and kitchen remodeling services. These companies apply their extensive plumbing skills and experience in home remodeling projects with outstanding success. When it comes to bathroom remodeling, you will need the very best plumber or remodeler to ensure that the job is done perfectly. Bathroom remodeling projects are quite resource-intensive and you might end up wasting a lot of money if you hire an incompetent plumber for the project. That is why you should always consider the expertise and experience of the plumber in relation to bathroom remodeling projects before hiring him. You should also ensure that your bathroom remodeler is properly licensed, insured, and bonded as required by the law. And last but not least, you should always consider the terms of contract offered by the plumber before hiring him for your DC bathroom remodeling project. The following tips will help you hire the most reliable, competent, trustworthy, affordable, and legally compliant bathroom remodeler in Washington DC.

Consider Bathroom Remodeling Expertise And Experience

When looking for a professional bathroom remodeler in Washington DC, you should start your search on the internet. You can use various search engines like Google or Yahoo to search for any bathroom remodelers in the Washington DC area. After acquiring a list of plumbing companies that offer bathroom remodeling services in your locality, you can proceed to weed out the most incompetent and disreputable bathroom remodelers in DC. You can visit various online customer review platforms like Yelp and Angie’s List to determine the ranking and rating of various bathroom remodelers in DC. You can then proceed to determine the expertise and experience of the top rated bathroom remodelers in DC. This will involve contacting all the top rated local plumbers directly and asking them about their expertise and years of experience. You should only hire the most competent and experienced bathroom remodeler in the state for your project.

Consider The Terms Of Contract

One of the most important considerations when hiring a bathroom remodeler in DC is his terms of contract. When vetting the top rated bathroom remodelers in the state, you should ask them about your project. You should consult these leading bathroom remodelers regarding your project. Some plumbing companies offer free cost estimates for various plumbing projects. You can ask for a free cost estimate for your bathroom remodeling project from each of these top ranked local bathroom remodelers. You should also ask each of these bathroom remodeling companies about their other terms of contract including the warranty of the project, the project completion schedule, the quality of materials, the project handover timeline, and the communication and monitoring strategy for the whole project. You should compare the terms of contract offered by each of these top ranked bathroom remodelers before picking the most favorable.

Consider Licensing, Insurance And Bonding

And last but not least, you should always ensure that your bathroom remodeler is legally compliant. This means that you should ensure that the plumbing company is properly licensed at the state level. In other words, you should ask each of these top rated bathroom remodelers for their license number and verify it at the state level. You should also ensure that all the technicians or remodelers working on your project are properly insured and bonded as required by the law.

5 Common Causes Of Sewer Line Clogs

August 20, 2018Commercial Plumbing, DC Plumber, Helpful Hints, How To, Plumbing Advice, Sewer Issues, Uncategorizedmatt

Sewer line clogs are some of the most expensive and disastrous plumbing problems at home. This is mainly because most sewer lines run underground. This creates a problem of access, which makes diagnosis of various sewer line problems almost impossible to an amateur. Plumbing companies use cutting edge plumbing technologies to diagnose and solve various sewer line issues. In order to diagnose a clogging problem in your sewer lines, the plumbing company will use underground video camera inspection. This is where the plumber will install a video camera inside your sewer lines and moves it along remotely until he finds the clog. The plumber monitors the movement of the video camera and sees everything inside the sewer lines using a video screen above the ground. Nowadays every established residential and commercial plumber in DC offers video camera sewer inspections. Plumbing companies use various technologies to unclog sewer lines. The most commonly used sewer line unclogging technologies include hydro jetting, and sewer snaking or rodding. Today we are going to look at the five main causes of sewer line clogs.

Broken Or Damaged Sewer Lines

Sewer lines wear out with time. After many years of usage, sewer lines get damaged and broken like all other installations. This is mainly caused by continued usage, corrosion, weight pressure by overlying structures and soil, and so on. If your sewer lines are broken or damaged, then you will suffer very serious clogging problems. This is mainly because the broken sewer lines do not drain liquid waste as well as they should. You will find that the damaged pipes maybe leaking or could have caved thereby blocking the flow of liquid waste from your house to the septic tank or municipal main sewer system. You should have all your sewer lines inspected regularly by a licensed plumber, to repair or replace any old damaged pipes in your sewer system to avoid sewer line clogs.

Tree Root Intrusion

Tree roots are another major cause of sewer line clogging. Big trees have very long and strong roots. These roots usually grow downwards and infiltrate your sewer line network. The roots can even penetrate the sewer lines and clog the sewer system by blocking the flow of liquid waste in the pipes. You should remove all big trees that grow above your sewer lines to prevent tree root intrusion.

Bad Flushing Habits

One of the most common causes of sewer line clogs is bad flushing habits. This is where people flush all kinds of waste down the toilet. The toilet should only be used to flush human waste. All other items including paper and cloth napkins, feminine products, and so on should not be flushed down the toilet to avoid clogging.

Bad Waste Disposal Habits

Just like bad flushing habits, bad waste disposal habits are a negligent and careless cause of sewer line clogs. Many people dispose solid waste in their sink drains. This is a major cause of drainage and sewer line clogging. You should also avoid dumping oils, fats, and greases in your sink because these coagulate inside your sewer lines thereby clogging the entire sewer system.

Sagging Sewer Lines

Underground sewer lines tend to sag after some time. This is mainly caused by natural and environmental factors like soil shifts. There is nothing you can do to prevent sagging sewer lines except having them inspected and replaced as soon as possible.